Norton Firewall Settings for SeeNoEvil

  1. Open the Norton Control Panel
  2. Click Change Advanced Settings
  3. Click Firewall Protection Settings
  4. On the Firewall General Rules tab, click on SeeNoEvil
  5. Click Modify
  6. Click Permit, then Next
  7. Select Inbound, then Next
  8. Select the default of Any Computer, then Next
  9. Click Add
  10. Select Port 6256
  11. Click OK, then Next twice
  12. Type SeeNoEvil as the Rule Description, then Next
  13. Verify the information entered, then click Finish
  14. Click Apply, then Close